SCTE-35/104 Output Setup

 

The SCTE Plugin Output is designed to provide ability for sending SCTE triggers depending on workflow and output configuration. SCTE35 for UDP outputs and SCTE104 for SDI outputs.

 

 

NOTE: In order to send an SCTE triggers from Playlist or ShotBox you have to do also necessary configuration in outputs as follows:

SCTE - 35 -> MPEG TS Settings

SCTE -104 -> DECKLINK

SCTE - 35 -> IP Settings

For SDI the setting is integrated and running by default. You simply have to open Settings -> Outputs -> Select the SDI output -> Settings and use the Line scroller to select the line, on which you would like SCTE 104 commands to be output. By default, line 15 is used here.