VideoHub Switcher Output

This event activates the VideoHub Switcher. Before adding/inserting such an event, you need to configure its settings from Settings -> Modules -> Remote control -> VideoHub Switcher Output.

The Configuration dialog consists of three main Layers: Video, Monitoring, and Deck. Click on the respective buttons to set their individual matrices. The Video and the Monitoring layer are controlled by an SDI Input/Output. They share the same Input port but have different Output ports. The Deck layer, on the other hand, is controlled via serial port RS-422.

Other than that, the VideoHub matrix is operated in the same way as all other external event matrices.