Color Frames Detection – Video

 

 

This test checks the content of a video stream and reports the duration of the frames with a predefined color. It is possible to set up to three different colors. The parameters that you can configure are listed and described below:

Parameter name

Description

Color configured (0 –No)

If the value is not zero the test will check the content for this color, the color will be skipped otherwise

Color (R,G,B or Y;U;V)

Color to be checked. Use ',' delimiter to specify RGB color or ';' delimiter to specify YUV color

Color tolerance

The allowed deviation for each of the color coordinate (RGB or YUV)

Percent of pixels with given color (0.00 – 100.00)

If the pixels of a frame exceed this percent the test decides the frame is colored with the given color

Total number of allowed errors (-1 means unlimited)

The maximum number of errors allowed per stream

Measurement time interval  - MTI (ms)

MTI (ms) - predefined time interval

Allowed number of errors per MTI (-1 means unlimited)

The maximum number of errors allowed per MTI

Fatal error duration (ms) (-1 means unlimited)

The minimum duration that is decided to be a 'fatal error'

Allowed color display duration (ms)

The minimum duration that is decided to be an 'error'