GPI Input Playout Configuration


The general use of these commands is when X-Pert Playout is expecting to receive any GPI commands.



To assign a device, select it from the list to the left and specify to which COM port you will connect it.

In the Pulse Level field to the right, you can specify the type of the trigger pulse.

Below, set the GPI commands from the relevant drop-down lists.


When Jump To or Cue To GPI command is selected, the next column on the right will become active.


The last column on the right is provided for delay adjustment of a corresponding command in a row. The timing mater is in milliseconds.