Relay GPI In

In the Input field select the GPI input number to be configured.

By default, the GPI signal has a High pulse level. If you want to transform the signal to a Low level, check the Invert Levels check-box. In this way the action will be executed when the GPI relay is switched OFF, and it will be terminated when it is switched ON.

Check the GPI radio-button to execute an X-Pert Playout action upon receiving a pulse on the Relay input. In the next Action field, define the X-Pert Playout action [Play, Stop, Pause, Resume, Next, etc.]. The next Item field becomes available if you have selected the [Cue to] or [Jump to] action. Then, in the Item field, you can specify the number of the playlist item to cue to or jump to.

If you want the same X-Pert Playout action to be triggered at the beginning of the GPI pulse and at the end of the GPI pulse, press the Trigger radio-button. If the action is [Cue to] or [Jump to], then in the Item field you can specify the number of the playlist item to cue to or jump to.

If you want different X-Pert Playout actions to be triggered at the beginning and at the end of the GPI pulse, select the Front radio button. In the Begin field, enter the X-Pert Playout action to be executed upon the pulse beginning. Respectively, in the End field, enter the X-Pert Playout action to be executed upon the pulse ending.

Delay – this is the delay of the X-Pert Playout action in milliseconds.