Kramer Mixer Switcher Configuration

 

 

 Local mode – check it if the switcher is connected to one of the server COM ports (select it from the drop-down list below).

 

 Remote mode – if the device is connected to another server in the local area network, and enter the IP address and port of the server in the fields below. Select the remote mode option if the matrix switcher will be controlled by more than one X-Pert software instances.

 

Once you specify the setup, click OK.

 

X-Pert software supports the entire series of Kramer matrix switchers. They provide switching between 16, 12, 10, 8, 6, or 4 video and balanced/unbalanced audio and video inputs to 16, 12, 10, 8, 6 or 4 outputs (video and audio). The matrices are controlled via RS-232 and/or RS485/422 communication ports. Just select the appropriate COM Port. For more detailed information about various Kramer matrix switchers, please, visit http://www.kramerelectronics.com

 

NOTE: This plug-in also supports all Kramer switchers that are protocol 2000 compatible, such as Kramer VS-1201xl, VS-1001xl, VS-801xl, VS-601xl, VS-401xl and VS-1211, VS-1011, VS-811, VS-611, VS-411. They provide switching between 12, 10, 8, 6 or 4 video and balanced/unbalanced audio inputs to one output (video and audio).

 

IMPORTANT: X-Pert modules DO NOT support the Deck Control connector, supplied on the DeckLink breakout cable!