Kramer Switcher Configuration

 

 

To configure the Kramer Switcher the following information should be specified:

 

Model of the Kramer Switcher you are going to use. All supported devices are listed in the drop-down menu in the configuration dialog form.

 

Protocol field will be used for communication to the switcher. You may choose it from the drop-down list of available protocols.

 

COM port of the server to which your switcher is connected.

 

Baud rate of the port from the drop-down list.

 

Click OK to confirm the configuration.

 

NOTE: The Kramer Switcher plugin support all models from the x01 and x11 series, through the RS-232 and/or RS485/422 communication ports. The plug-in does not support protocol 2000!