Elpro Switcher Configuration

 

 

In the Elpro switcher configuration dialog, select the operation mode of the device from the following options:

 

Local mode if the switcher is connected to a COM port on the current server, and select the COM port from the drop-down list.

 

Network mode if the switcher is connected to another server in the local area network, and enter the IP address of the server in the field.

Once you complete the configuration, click OK.

 

NOTE: To control an Elpro switcher from multiple X-Pert Ingest software instances, you need the Elpro Switcher Server add-on.